#1
|
||||
|
||||
Lighthouse Punta Salvore in Savudria, Croatia - Kartonwerft - 1:100
Hello, everyone
After I received my order from the cardboard shipyard, I immediately had to cut into one of the beautiful lighthouses. I chose the one from Punta Salvore. There are 52 to 86 parts to assemble on six A4 sheets. I really like the lovely hand-drawn graphics. Construction phase 1, the tower base ... Part 1, the base plate, which I have reduced a little. Reinforced with two 1.5 mm Finn cardboard and work openings cut out. Sincerely Kurt |
Google Adsense |
#2
|
||||
|
||||
Hello Kurt,
I really like lighthouses... During my holiday this year (Istria) my family and I also looked at this tower, I really liked it. So I'm really looking forward to the construction! Regards, Joe
__________________
My the harbour: http://www.papermodelers.com/forum/d...our-1800s.html |
#3
|
||||
|
||||
Hello Joe ,
itīs nice to meet you here Part 2 and 2a with 1 mm cardboard reinforcements The first small parts reinforced with 0.5 mm ... and built in, fits perfectly! Now glue in the reinforcements ... and put the tower foot on the base plate Sincerely Kurt |
#4
|
||||
|
||||
nice work Kurt
__________________
David........... Paper modelling gives you a happy high. currently building. c GAZ 51 ALG 17, wagon 111a. unex DH411 excavator and spitfire Mk 9 |
#5
|
||||
|
||||
Thanks David
Reinforce part 6 to 0.5 mm ... cut inside corners for fermentation ... ... and attach ... Prepare part 7 ... ... glue together ... and attach to the base of the tower, construction section 1 finished Sincerely Kurt |
Google Adsense |
#6
|
||||
|
||||
Construction phase 2, the house ... consisting of three parts ... ... prepared with window and door ... placed on the base plate, there is another step at the entrance Sincerely Kurt |
#7
|
||||
|
||||
Part 14 glued to 0.5 mm cardboard ... and put on the wall Provide part 15 with cardboard strips ... and butt glue ... ... so the strips can easily be glued on Sincerely Kurt |
#8
|
||||
|
||||
Construction phase 3 ... when reinforcing the roof, make sure that 1.5 cm remain free for the tabs on the walls ... ... now put on the roof, it fits perfectly, glue on the ridge tiles ... between the two sides of the shutters I glued another box with a thickness of 0.2 mm ... ... a spacer is glued on the back ... so that the shutters protrude slightly from the wall Sincerely Kurt |
#9
|
||||
|
||||
Construction phase 4 ... ... twice cut 0.8 mm cardboard exactly ... is installed in the top of the tower base Kind regards Kurt |
#10
|
||||
|
||||
Part 18 ... is provided with small tabs on the inside in the corners ... ... to connect them ... and to put the foot on the tower Now cut out the railing ... and attach to the front Kind regards Kurt |
Google Adsense |
|
|