#21
|
||||
|
||||
Thank you David
Interesting roof construction...put on part 16 first... ... then the tip ... and finally the border Sincerely Kurt |
#22
|
||||
|
||||
The parts for the lower bell tower ... the filigree columns are glued behind ... ... Glue the top and bottom with two side walls ... and insert the bell, let it dry well Sincerely Kurt |
#23
|
||||
|
||||
Looks really wonderful!!!
__________________
Andrew aka Viator |
#24
|
||||
|
||||
I'll second that.
__________________
Give me a pigfoot and a bottle of beer. On Flickr: https://www.flickr.com/photos/153077...57692694097642 |
#25
|
||||
|
||||
With the fourth part ... the turret is closed Now the outer paneling... and glue four moldings under the gable Sincerely Kurt |
Google Adsense |
#26
|
||||
|
||||
For the elaborate tower, the wooden frames are now cut out ... and glued on ... Now connect the turrets ... and attach the roof parts 21 ... then place the completed tower on the church Sincerely Kurt |
#27
|
||||
|
||||
The central roof consists of four parts... I removed the tabs and glued new ones behind to avoid a bump The little church is finished with the roof Sincerely Kurt |
#28
|
||||
|
||||
Then comes the construction of the bridge ... Frames 24 to 28 ... ... glue and prepare panels ... and glue on Assemble the second base in the same way Sincerely Kurt |
#29
|
||||
|
||||
Fix the two bases on the base plate ... first fitting of the church Two concrete bridge pillars ... insert in the middle Sincerely Kurt |
#30
|
||||
|
||||
Now insert the wooden bridge piers...on either side of the middle I form the embankment with tea bag paper and glue ... apply gravel and greenery, the water is filled with glue ... ... and put on the church Sincerely Kurt |
Google Adsense |
Thread Tools | |
Display Modes | |
|
|