#31
|
||||
|
||||
Hello everyone
Now glue the side roof... and build the whole wall... ... as well as attaching the retaining walls. Sincerely Kurt |
#32
|
||||
|
||||
Hello
The gable on the back follows...all openings cut out... ... windows and doors glued behind ... and window shutters glued on. Best regards Kurt |
#33
|
||||
|
||||
Hello
Now glue the whole wall... The base for the support pillars is reinforced with 1.5mm Finn cardboard... ... and built around the pillars below ... so the building is closed for the time being. Best regards Kurt |
#34
|
||||
|
||||
Hello everyone ,
there are small construction progresses again... Now for the construction of the tower...preparing the three parts... ... and glued ... now the small columns for the balustrade, removing the tabs here and gluing them butt Sincerely Kurt |
#35
|
||||
|
||||
Hello
I reinforce the railing with 0.9 mm Finn cardboard ... and put it between the columns By cutting out the spaces in between, beautiful shadows are created ... The railing is covered with the four parts T 7 . Sincerely Kurt |
Google Adsense |
#36
|
||||
|
||||
and further in this theater ...
... with the roof T 8 and reinforcement T 10 ... first glue , then insert the 1mm reinforcements and glue part T 10 on the bottom . The roof has become very stable thanks to reinforcements... Roof placed on the balustrade. Sincerely Kurt |
#37
|
||||
|
||||
This looks excellent Kurt, all the enhancements and relief you are adding to the model, especially with the windows and hatches. One thing you might consider is to also highlight the wall anchors. The coloring of this model is very attractive and the end result will be wonderful. Leon Schuijt is a paper modeling publisher from the town of Alkmaar and likely will be very pleased with your build should you send him pictures of the end result .
Cheers, Erik |
#38
|
||||
|
||||
Hello Erik ,
Thank you for your positive comment. Since I would also like to be finished, I have to draw a line somewhere in the Superungen. I am very pleased that the designer of the model liked my construction. Of course I can send Mr. Leon Schuijt pictures after completion. and further ... The next floor with the clocks, frames U+V are doubled ... first prepare the 1 mm cardboard reinforcements. The last cardboard segment is only inserted after assembly ... I use a piece of 1.5 mm thick Finn cardboard on the back of the clocks. Sincerely Kurt |
#39
|
||||
|
||||
Very fine model and a great job! For me it looks surprisingly realistic.
__________________
Andrew aka Viator |
#40
|
||||
|
||||
Hi Viator , thank you , it is a real fine model
Hello to all others ... Now glue the clocks on... glue them together and close them at the top and bottom. The clock segment fixed on the roof. Sincerely Kurt |
Google Adsense |
Thread Tools | |
Display Modes | |
|
|