#21
|
||||
|
||||
Hello Siwi
This works quite well with the roofs and there are no problems with gluing .................... The D9... amplifies... ... and placed on the semicircular tower... now place the building on the base plate... ... fits well . Sincerely Kurt |
#22
|
||||
|
||||
Hello everyone
Continue with the battlement wall D3 ... which is dismantled, for the wall 3 mm and for the battlements 1mm Finn cardboard ... ... after reinforcing the battlements cut out ... wall with the 3mm Finn cardboard stuck behind, battlement put on and the battlements glued on for the back. Trying on the wall, but not gluing it yet. Sincerely Kurt |
#23
|
||||
|
||||
And we continue.....
Due to the cramped conditions, the greening is already starting...then I can also glue the crenellated wall. Parts D10 / D11 ... reinforced ... .... and attached to the battlement wall Sincerely Kurt |
#24
|
||||
|
||||
Hello !!
Wall parts D12 and W ... which are reinforced with 1.5 mm and divided ... ... so that the individual elements are cut to size ... and installed At the end of this segment there is the greening Sincerely Kurt |
#25
|
||||
|
||||
It goes on ,
The knight of the house is pushing for completion :D Wall part G1 ... I simply leave openings without windows open Part G2... again with some windows... Both parts of the wall connected Sincerely Kurt |
Google Adsense |
#26
|
||||
|
||||
and further ...
Plafond G and 1.5 mm copy... glued on the outside... and insert the 1.5 mm copy and reinforcement inside...before the building is assembled, the greening is carried out on the staircase... ... and also on the outside of the tower Sincerely Kurt |
#27
|
||||
|
||||
Castle construction is progressing
With the Pallas we arrived inside the castle... the large roof G3... ... is lined on the inside with 1 mm cardboard ... and closed The Pallas is placed in the courtyard Sincerely Kurt |
#28
|
||||
|
||||
And further ....
A look into the staircase... and the following parts... ... a small tower ... which is built on Pallas Sincerely Kurt |
#29
|
||||
|
||||
Hello
The small gate is modified...assembled... ... and used between the two buildings Parts G6 to G8... are wrapped around the tower in layers Sincerely Kurt |
#30
|
||||
|
||||
Continue building castles...
The two roof parts G9 / G10... first glue the cone on... ... then add the ring all around Prepare part G11... do the steps here in 3D and glue them to the Pallas Sincerely Kurt |
Google Adsense |
|
|