|
|
|
#1
07-24-2024, 10:58 PM
|
||||
|
||||
|
Michaelis Church Hamburg - 1:300 - Schreiber
Hello
With my next project I have solid ground under my feet again. The Hamburg Michel is on the agenda :thumbup: There are around 300 neatly printed parts spread across thirteen A4 sheets. As the parts are built in numbered order, there are no written assembly instructions. However, there are eight construction sketches that explain the assembly. Kind regards, Kurt 
|
| Google Adsense |
|
#2
07-25-2024, 08:22 AM
|
||||
|
||||
|
Looking forward to this, sir. I am sure you will do it proud
__________________
A fine is a tax when you do wrong. A tax is a fine when you do well.
|
|
#3
07-25-2024, 02:14 PM
|
||||
|
||||
|
I can hardly wait!
__________________
Give me a pigfoot and a bottle of beer. On Flickr: https://www.flickr.com/photos/153077...57692694097642
|
|
#4
07-25-2024, 11:44 PM
|
||||
|
||||
|
Hello everyone,
Now let's get started, the first cut is the deepest Start with the base plate... which is reinforced with two 1 mm cardboards after the inner surfaces have been cut out Part 2, cut out openings... prepare 1 mm reinforcements... ... and insert the wall niches 2a/2b from behind Kind regards, Kurt 
|
|
#5
07-30-2024, 11:58 PM
|
||||
|
||||
|
And further on at the Michl construction site ....
Glue in reinforcements...this will make the walls and niches very stable Glue the tower together...and only now insert the last strip of cardboard, so the tab is also reinforced Now the tower can be anchored to the base plate Kind regards, Kurt
|
| Google Adsense |
|
#6
07-31-2024, 12:05 AM
|
||||
|
||||
|
Hello
Now we continue with the cladding of the tower... first eight parts 3/3a... ...which are installed on the tower... this already creates a nice structure Kind regards Kurt 
|
|
#8
08-01-2024, 08:49 AM
|
||||
|
||||
|
Hi Viator , thank you so much
A small update... I reinforce the 3d/e parts... with 1 mm cardboard... ... before they are glued on. Kind regards, Kurt
|
|
#9
08-01-2024, 11:16 PM
|
||||
|
||||
|
Hello
I reinforce parts 4 ... with 1mm cardboard ... ... and attach them all around ... Parts 4a/b deviate slightly from the norm Kind regards Kurt
|
|
#10
08-03-2024, 11:01 PM
|
||||
|
||||
|
And further...
Reinforce wall sections 5/5a with 1mm cardboard and glue them step by step... leaving two holes open in the corners... ... which are closed with grey construction paper... the facade is slowly developing, exciting to build! Kind regards, Kurt
|
| Google Adsense |
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
