​Bedzin Castle / Poland - GPM - 1:160

[Styrian Spitfire]

now continue...

Prepare wall section 43 in front of round... openings...

... and glue it.

I'll start the extension on the right side... and move step by step to the left.

With kind regards,
Kurt

[rockpaperscissor]

Impeccable craftsmanship as always. Your architecture build threads are always inspirational to me.

[Styrian Spitfire]

Hello everyone,

First of all, thank you very much for all the thumbs up from you, that's really motivating!

Hello Don, thank you, I'm happy if I can inspire other model builders!

Let's continue...

Next is the round tower, openings provided with frames, frames reinforced (1mm)... frame inserted at the bottom and 0.2 mm paper glued in for reinforcement.

Close the cylinder with the upper frame... do the same for the upper part of the tower.

For the battlements, the frames are first reinforced (0.9 mm Finn cardboard)

Kind regards,
Kurt

[Styrian Spitfire]

It continues...

Glue the rings together... until the platform is finished.

Now assemble the thirty-nine pinnacles, removing all the tabs and gluing them together...
let the thirty-nine pinnacles dry thoroughly.

Kind regards,

Kurt

[Styrian Spitfire]

Hello...

The platform has been placed on top and glued.

Before the battlements are installed, parts 74/76 still need to be attached... Glue the border step by step...

... insert the panels... all fifty panels installed.

Best regards,
Kurt

[Styrian Spitfire]

Continuing on with this construction site...

Now add the thirty-nine battlements... and glue the two tower segments together...

... glue strip 75 between them.

Parts 82/83... are placed at the top of the tower.

Best regards,
Kurt

[Styrian Spitfire]

Hello everyone,

Place the finished tower in the castle courtyard... Part 77 shows a rocky section...

... which will be covered with grass... grass is also growing in the upper corner.

Best regards,
Kurt

[Styrian Spitfire]

Further on...

The next staircase... leads to the tower entrance.

Reinforce part 81 with 0.8 mm cardboard... and attach it to the base of the tower, then cover it with grass and gravel.

A view of the castle courtyard.

Best regards,
Kurt

[Michael Mash]

The stone textures look so realistic in your photos.
Excellent work Kurt.
Mike

[Styrian Spitfire]

Hello Mike , thank you

Wall section 47 with 1mm reinforcement... closes off the castle courtyard.

Outbuilding 51... insert into the curve.

Best regards,
Kurt