M4a3 sherman - gpm - 1:25

[Styrian Spitfire]

and now the pictures

[Styrian Spitfire]

Now assemble parts 14 ... and glue on 14d ...

... then glue parts 13 to parts 9 ... repeat this process six times

Sincerely
Kurt

[SinDiPaper]

wow.. What a nice builds!
I can't wait to see next step :D

[Styrian Spitfire]

Hi SinDiPaper ,

here you can see the next step ...


Glue on two rolls at a time and then fold them up ... the whole thing six times

Sincerely
Kurt

[Styrian Spitfire]

and slowly it goes on again ...


Now the rollers, so the next hours are already preprogrammed ... I start with the rings 15a which I cut out first inside and then outside with the knife

... and color the edges 28 times ... the next rings, which are reinforced with 0.5 mm cardboard. First divide the inner surface into segments, then cut out with the knife, cut around the outside with scissors, and dye the edges again ...

... so again 28 pieces are ready

Sincerely
Kurt

[Styrian Spitfire]

Now put the running surfaces 15b on the rings ... insert the inner ring ...

and put on the thin rings on the outside

Sincerely
Kurt

[smithdr]

You are a patient man, Kurt. Looks fantastic!

Dan

[Erik Zwaan]

Amazing work Kurt, patience is indeed the right word. Interesting cutting technique you have for removing the inner white circles. I can imagine that after a few hours of cutting your wrist and fingers start to feel sour. At least, mine would.....

Cheers,
Erik

[Styrian Spitfire]

Hi Dan , thank you so much

Hi Erik , it is not so hard because I always working in short time segments

but now let´s go again ...

Cut out twenty-eight rings ... glue fourteen rolls to form cylinders and glue them into the rings

Put part 15g on the cylinder twenty-eight times and insert it into the rollers ... another section finished

Sincerely
Kurt

[romanmodels]

making good progress Kurt