#31
|
||||
|
||||
Wowww
this should be interesting .... she is going to be huge
__________________
Moshe O |
#32
|
||||
|
||||
Hello,
I'm going to use two 70mm EDFs, 3000kV motors and two packs 4 cell 4000mA. I did not have a traction test yet. |
#33
|
||||
|
||||
Slowly, slowly , gets the shape.
Teo |
#34
|
||||
|
||||
Impressive
that is biggggg
__________________
Moshe O |
#35
|
|||
|
|||
Beautiful and impressive.
What do you use for wing spars? Gene K |
Google Adsense |
#36
|
||||
|
||||
Hello,
I temporarily interrupted work at F15 being hijacked by another project started during the winter holidays: Mitsubishi A6M5 Zero ..... Last edited by mantraro; 04-07-2019 at 01:35 PM. |
#37
|
||||
|
||||
I am still not clear how you make the sections? Do you print on the Depron directly or print on the paper and then glue it to the Depron?
Also, how do you connect the fuselage sections together? Do you use glue tabs? Does anyone else know this technique? Thanks Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
#38
|
||||
|
||||
Hello, for the fitting of the fuselage sections I use a 6mm thick depron. On the depron material the epoxy joints are more resistant than the material. The resistance beams of the wing are made of 1mm plywood glued on 6mm foam or even 4mm balsa. The paper sheets are preprinted, stick on the depron and then bend, the paper reinforce all this structure
Teo |
#39
|
||||
|
||||
Quote:
I assume that the paper is sprayed with clear coat to prevent it from getting wet. Thanks Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
#40
|
||||
|
||||
|
Google Adsense |
|
|