#11
|
|||
|
|||
Sorry, I was wrong. I must change my congratulations to CCoyle, author of the finished model before presented . Styirian Spitfire you have a difficult challenge to improve it, I hope to congratulate you too
Regards |
#12
|
||||
|
||||
Part 2, preform the cockpit ... assemble with small tabs ... ... and glue in part 1, fits perfectly! Sincerely Kurt |
#13
|
||||
|
||||
Part 3 with frames B + B1 ... first glue frame B1 I prefer the parts 75, round well and butt glue. This is definitely better now than when the fuselage is closed ... only then insert frame C. Sincerely Kurt |
#14
|
||||
|
||||
Part 4 with frames A + B ... glue frame A with the printed side facing inwards, now part 78 ... ... install in the landing gear shaft ... and close with former B ... ... with the printed side on the inside too Sincerely Kurt |
#15
|
|||
|
|||
Good and clean work Styrian I am following you closely because this aircraft will be a future target for me. regards
|
Google Adsense |
#16
|
||||
|
||||
Looking good Kurt, let's hope that all fuselage segments will join smoothly, as the formers have to mate without a joining strip (the usual method). Interesting build!
Regards, Erik |
#17
|
||||
|
||||
Looks like another great build mate.
|
#18
|
||||
|
||||
@ Llaut Mallorquin : maybe I can motivate you to build the Buffalo @ Erik : For me, too, it is the first model using this construction method @ Mike , I wil hope so now letīs go on ... Part 5 with frames, I cut off the body bottle ... glaze and insert the inner frame ... ... after closing the cylinder install inner part 81 ... frame D1 is divided and first fitted dry ... ... after gluing, don't forget to color the edges in five different colors. The small upper part of the frame behind the glazing remains inside for shaping Sincerely Kurt |
#19
|
|||
|
|||
Hello Styrian I have made some model with the system that you are making the Buffalo. The most difficult thing (as you know) is to get the perfect fit between the various sections. Sometimes the reinforcement discs do not exactly fits with the part of the fuselage. But this kits are usually well designed. I wish you a happy culmination of that special plane. I'm sure it will be perfect and motivating for my next construction Regards
|
#20
|
||||
|
||||
What kind of glue are you using Kurt for attaching the transparent part? UHU or the like? Or double sided tape? Somehow I always find this a tricky part in any build. In a way it is a pity that the roundels are cut in half over the fuselage, it will never be possible to fully mate the edges. Some designers correct for this, allowing the builder to glue roundels or doors as separate parts. Nice build!
Regards, Erik |
Google Adsense |
|
|