Paragon Aircraft - Page 5

**Xiaoyang** · #41 03-21-2021, 11:27 AM

and here's colored version

(I haven't tested it yet, so there could be some misplaced decal)

**Dragos** · #42 03-21-2021, 01:35 PM

No one said anything about the J-13... so I've uploaded the file

**Xiaoyang** · #43 03-21-2021, 02:37 PM

Quote:

Originally Posted by Dragos

No one said anything about the J-13... so I've uploaded the file

And the "J-15", just uploaded it.

**juan angel 747** · #44 03-21-2021, 08:37 PM

I think they should upload photos of the models
so that these are easier to assemble

**tigertony100** · #45 03-21-2021, 09:53 PM

Hello everyone! I'm giving a basic Papercraft course in Face Book and we started with the Scissors & Planes models from the MiG-15, then the MiG-17 adapted by cafe. But unfortunately Bruno did not make the MiG-19 for free; only paid and without landing gear. But luckily these Paragon models were revived and then it allows me to continue with the series. In the morning I unexpectedly bumped into Xiaoyang's version and scissors him immediately. Here the WIP of the recolor version of Xiaoyang, the original Mig-19 and you can see Bruno's MiG-19 still in pieces. Best Regards. Tony.
[IMG]

[/IMG]
[IMG]

[/IMG]

**Xiaoyang** · #46 03-22-2021, 02:21 AM

Just built a partial test version and found some problems that need to be fix.

I'll upload the repaired version when I finished.

**cafe** · #47 03-22-2021, 03:16 AM

Quote:

Originally Posted by Xiaoyang

Just built a partial test version and found some problems that need to be fix.

I'll upload the repaired version when I finished.

I did one too. Redraw of a redraw! Mine is in 1:200. :-)

The two main issues I find are:
- the panel lines figuring the bumps at the wing root don't align between the nose and the central fuselage, meaning the holes I did to insert a wing spar were too low.
- the joint between the top side of the stabs should be more enveloping. the upperside shouldn't be a copy of the underside.

Seems we have the sames ones.

I built my example like a S&P model, giving some volume to the wings, stabs and fin.

**Xiaoyang** · #48 03-22-2021, 04:43 AM

Quote:

Originally Posted by cafe

I did one too. Redraw of a redraw! Mine is in 1:200. :-)

The two main issues I find are:
- the panel lines figuring the bumps at the wing root don't align between the nose and the central fuselage, meaning the holes I did to insert a wing spar were too low.
- the joint between the top side of the stabs should be more enveloping. the upperside shouldn't be a copy of the underside.

Seems we have the sames ones.

I built my example like a S&P model, giving some volume to the wings, stabs and fin.

here you are, the issues you mention are all resolved.

**cafe** · #49 03-22-2021, 06:51 AM

Thank you Xiaoyang!

On the uploading front, I've added Paragon's Sabre and A-10.

**Diermeier Ralf** · #50 03-22-2021, 07:50 AM

Hello friends,

manny thanks to Paragon und all the others for reup the paragon models.

I am looking for the Lockheed CL-1200 Lancer from the old Paragon-Site.

Greetings from germany

Ralf