#31
|
||||
|
||||
Nacelles attached
Cut a hole in the nacelles to allow the metal rod to penetrate and also added a small stub metal rod to the front.
I kept small pieces of the wing to act as tabs to glue to the nacelles. In hindsight, they are not needed. top and bottom looks Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
#32
|
||||
|
||||
The metal music wire looks like it is working very well Isaac. The inner wing sections and nacelles look pretty good. Keep it up.
Gary
__________________
"Fast is fine, but accuracy is everything" - Wyatt Earp Design Group Alpha https://ecardmodels.com/vendors/design-group-alpha |
#33
|
||||
|
||||
It looks terrific!
Don |
#34
|
||||
|
||||
t.7 / NF.11
Hello Isaac,
I just started looking for scale drawings of T.7 and NF.11. I got some good ones for the trainer version, but as of yet nothing for NF.11. Any help with scale drawings will be greatly appreciated Anyway, I will start a separate thread on 'Design Threads' soon to keep yours clear. All the best with your F.3 version! Cybermac |
#35
|
||||
|
||||
Quote:
Some pics here The camouflage is the same as what Yoav designed for his Israeli F8 version. You can use it for your new thread. Thanks Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
Google Adsense |
#36
|
||||
|
||||
Very smart Isaac, to use the long metal pin for overall reinforcement and lateral alignment of the wing sections. Like beads on a string. As well as the front pin for longitudinal alignment of the engine nacelles. In a way, placing your own stamp on the model in this way must be quite satisfying, if the proper fit doesn't come from the model itself .
Erik |
#37
|
|||
|
|||
Hi Isaac...
I'd say "solved". Nice one! Looks nice and everything look to match up too. Dan |
#38
|
||||
|
||||
Outer wing
For some reason, the designer of this model kept a small strip that is part of the outer wing as part of the inner extended wing on the nacelle outer section. Why, I don't know.
I cut if off, added a glue strip to the outer wing at that joint and glued together so I have one outer wing section and not two. after gluing, notice the mismatch in the green camo color ( what a screw up even for an old hand drawn design ). I added a rib ( part 16A ) to the outer nacelle where the outer wing will join. Notice the metal rod is piercing thru. I replaced the inner wing structure with balsa wood for the shape and strength. I also added two inner strips of wood for the metal rod to be supported. Fold over and glue along the trailing edge. Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
#39
|
||||
|
||||
Outer wings attached
At this point, I bent the metal music wire to a proper dihedral angle
The wing slips in. The metal rod slips in between the inner balsa wood strip blocks inside the wing acting as a guide and support. Required a few dry fitting both wings are on. inside view of attachment. The provided fillet will barely cover it later. Outer nacelle to wing fillet. Notice the color mismatch. Prevalent throughout the model. Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
#40
|
||||
|
||||
Your wing assembly made me think I should have done something similar with the upper wing construction on my Polikarpov. With that kit it is assembled as one piece but with three separate skins and that made it a bit challenging. I should have cut it in three separate sections so I got ideas from this so thanks. The Meteor is coming out nicely. I like the idea of building the same plane but from different kits, gives you a different insight to the subject. I'm playing with the idea of building the 'Night Witches' version too, now that I know how. ;-)
Tappi |
Google Adsense |
|
|