#1
|
|||
|
|||
1/33 De Havilland Mosquito - Maly Modelarz
I have completed this model in June 2022. On this forum, I will share the entire process and my feelings during the process with everyone.
|
Google Adsense |
#2
|
|||
|
|||
Starts with the construction of the cockpit.
|
#3
|
|||
|
|||
The building steps were carried out simultaneously from the cockpit and the machine gun compartment on the belly of the fuselage.
|
#4
|
|||
|
|||
Four machine guns installed inside the abdominal fuselage. At first, I planned to use stainless steel tubes to make gun barrels, but later found it difficult to cut them, so I switched to using ABS plastic rods. The effect after painting is equally good.
|
#5
|
|||
|
|||
It looks great, full of detail.
YOAV |
Google Adsense |
#6
|
|||
|
|||
The ammunition chains of the machine guns look a bit cartoonish. I originally intended to depict it in detail, but later became lazy and installed it according to the original design parts.
|
#7
|
|||
|
|||
There is a section of the fuselage near the rear landing gear where the color of the skin is printed incorrectly, and these parts are not very obvious
|
#8
|
|||
|
|||
Continue. It's a bit difficult to make a spherical shape for the nose bow, So after copying the parts, I made a paper bowl first.
|
#9
|
|||
|
|||
I filled the paper bowl with plaster again, and after it solidified, it can be used as a mold. Covering the parts on this mold made it much easier for me.
|
#10
|
|||
|
|||
Continue.........
|
Google Adsense |
Tags |
1/33, bomber, mosquito, ww2 |
|
|