#1
|
||||
|
||||
Mounting some 1/100 scratchbuit aircrafts
Hello Guys.
I open this post to show some of my mountings that I have in my archives. In other post I show a Sopwith Camel/ but I edited the first post and I cant edit again. So, I created this post where I show more mountings. I will posting step by step, trying explain the techniques. If someone has any questions, ask and I will try to clarify. I hope you enjoy. The first aricraft is the Morane Saulnier MS Type L Parasol. This model is the aircraft of the Rolland Garros, which was mounted the first machine gun shooting by the propeller circle. In this model I was testing new techniques, like using balsa wood to propellers, and engine with much more details. The wing was made with cardboard; I cut the two surfaces, superior and inferior. In sequence I give the profille shape to the wing and I glued a foam to maintain the wing profile - I used silicon glue to this. Later I mounted the wing, attaching the two pieces, with white glue. After the draying, I sanded the wing. Finaly I mounted the wing mount, using metallic wires, all attached with superglue.
__________________
Just For Today! |
Google Adsense |
#2
|
||||
|
||||
Now the fuselage.
In the first image, we have the two pieces above are the superior (left) and inferior (right) side; on the below, we have the fuselage laterals. In the central image we have the superior and inferior pieces with internal reinforcements, which are used to join the laterals. The right image show the fuselage under mounting - notice that the superior is shorter than the inferior. Now I glued a rounded piece in the front, and I made the entry of the cockpit. in the nose I glued a firewall. Here, I was detail the nose (notice a hole in the side. In sequence I cut two square pieces. Later I cut the landgear struts and I cut a needle. Finaly I mounted all these pieces in the place; the needle piece was insert in the hole of the side.
__________________
Just For Today! |
#3
|
||||
|
||||
__________________
Just For Today! |
#4
|
||||
|
||||
Very fine work!
|
#5
|
||||
|
||||
__________________
Just For Today! |
Google Adsense |
#6
|
|||
|
|||
Thanks for the detailed build notes and photos. I am enjoying it!
Gene K |
#7
|
||||
|
||||
Thanks Gene K (Kelly???)
__________________
Just For Today! |
#8
|
||||
|
||||
I'm following this thread as well, I enjoy watching projects come to a finish, much better than just seeing the finished model photos.
Thank you for sharing your progress! Mike |
#9
|
||||
|
||||
Lets go again! Here we have the landing gear tires; two simple circles, with circles without the center glued on them (it was clear??? ). Later I glued a conic piece in the center - it was made with a cardboard circle, where I cut a "pizza slice", and laterly I glue the edges, to obtain the conic shape
The horizontal and vertical stabilizer were made with cardboard. The horizontal stabilizers was joinded with a wire. And all pieces were joinded on the aircraft, with cyanoacrylate (CA). In the last image you see the tailpipe, built with wire.
__________________
Just For Today! |
#10
|
||||
|
||||
lets go with the engine. First I glued eight wire pieces on a cardboard circle (you see a lot of the glue in the center) - these are the cylinders. Later I made a string using a thin wire - I rolled the thin wire in a thick wire. In sequence I insert the spring into the cylinders. Finaly, I glued copper wire pieces in the cyliders, and a cardboard circle in the center.
Here I made the engine fairing. Is a simple circle, with a cardboard strip glued around it; after the drying, I cut the correct shape and glued the frontal piece; finaly I painted in black and insert the engine into the fairing ...and this is the result. I painted the fuselage, to simulate the dope aplication, and some black risks to simulate the internal structure. In hands, the tiny model looks better
__________________
Just For Today! |
Google Adsense |
|
|