#51
|
||||
|
||||
Part 90 covers the driver's cab ... parts 99 + 100, the bench for the upper "floor" ... ... which is grown above the driver Yours sincerely Kurt |
#52
|
||||
|
||||
Now the upper windshield, note that the "glass" protrudes all around 1mm ... on which the frame is glued
Now I'm thinking of the order in which the front end should be processed Yours sincerely Kurt |
#53
|
||||
|
||||
1. glue in the upper windscreen ... 2. dry fitting ... ... 3. glued the outer skin, it follows the upper frame ... Yours sincerely Kurt |
#54
|
||||
|
||||
That is looking real good.
__________________
~Doug~ AC010505 EAMUS CATULI! Audere est Facere THFC 19**-20** R.I.P. it up, Tear it up, Have a Ball |
#55
|
||||
|
||||
Thank you SCEtoAUX
... 4. the interior lining, where I have to tricks again ... 5. cut, cut and infer ... ... but then it has become quite neat ... also the overall picture makes me confident Sincerely Kurt |
Google Adsense |
#56
|
||||
|
||||
Hi ,
The gray trims are dyed with Edding silver pen ... and thus give a nice picture The two headlamps ... I modified something, the turn signals are treated with a drop of Micro Cristal Clear With friendly greetings Kurt |
#57
|
||||
|
||||
This is really coming along nicely!
|
#58
|
||||
|
||||
Thanks wholsey
The inner roof well in front of round and glue with thin paper strips ... let it dry well Now I stick the inner in the outer part, where I can survive behind 2 mm for the load compartment roof as a support Sincerely Kurt |
#59
|
||||
|
||||
Now it's really exciting, first I glue a page by means of a small tab ... then glue tab for tab once left and right once ... With the special equipment "silver trim", the whole thing does not look so bad Sincerely Kurt |
#60
|
||||
|
||||
Looking great Kurt. Very interesting.
__________________
The SD40 is 55 now! |
Google Adsense |
|
|