Custom punch sets, Need your opinions

[jmcdermott]

Originally Posted by akremedy

Yes, that and a basic French curve in metal as well.

Metric punches would be great, but in 1/64 increments, would it be close enough? It's equivalent to the difference between "do I cut on-the-line, or inside-the-line" - since I choose randomly anyway, it wouldn't make much difference to me :-)

Math for the Toolbox. SAE to Metric Conversion.

One last thought, any chance you could come up with a simple means of dealing with concentric circles? I've forgotten the link, but there is this great (and really expensive) set that deals with punching self-centering concentric circles. It's terribly out of reach for the cost for the average hobbiest.

If you could find links, that would be great. I am not really following you on what the tool does.

The sizes I gave were an example. I could do punches of any size SAE or metric.

My only limitations on punch sizes are the milling bits I can find.

[Jim Nunn]

Put me on the list for a metric set 1 to 3 mm in .5mm increments. Any chance you can make hex punch sets?

Jim Nunn

[jmcdermott]

Well, I am all set except for needing to make a bit order.

the examples in this photo are 1/32 (.79mm). The material on the right is .02 styrene and on the left 150lb card stock.

If you are serious about ordering a set, please pm me with your contact info and a list of punch sizes so I can order materials.

Thanks

[akremedy]

Originally Posted by jmcdermott

If you could find links, that would be great. I am not really following you on what the tool does.

The sizes I gave were an example. I could do punches of any size SAE or metric.

My only limitations on punch sizes are the milling bits I can find.

I found that concentric circle punch that I was thinking of: Precision Brand | Products

Originally spotted by dell_zantoz here: Punch

I gather there would be an awful lot of machining involved, but this is a great concept, especially for the armor builders that are out there.

[jmcdermott]

Originally Posted by akremedy

I found that concentric circle punch that I was thinking of: Precision Brand | Products

Originally spotted by dell_zantoz here: Punch

I gather there would be an awful lot of machining involved, but this is a great concept, especially for the armor builders that are out there.

Wow, that's a great tool. I am going to make one for myself in mini size.

It is a good bit of machining, but not terrible considering the small sizes I would use.

Thanks for the links.

[Peter Epps]

After thinking about it,and taking a good look at my tools, I have punch and die sets that are all ways either too big or too small for paper. As for paper kits metric would be a must have.
I love the idea of custom sets. I need something in between and the option of having it custom order is very cool.
What do you think your turn around time would be?
Peter

[jmcdermott]

Peter, 2-3 days turn around if I have materials in stock. I am putting together an order and I think it may be worthwhile to just go metric. That seems to be the common need.

Please let me know what you would like and I will get you on the list.

The lead time could quickly go to a week. I am getting a lot of interest and I have a regular job to contend with. Sat, Sun and Mon are my most productive days if I have a large order to fill.

The orders get filled in the order they are requested. Tuesday and Wednesday do not allow me much time to work because of other commitments.

I can take paypal to secure any order.

[Peter Epps]

Very cool, I am going to put my needs together and send you an order. How do you want to handle orders. Pay pal is ok by me.
Peter

[jmcdermott]

I am getting a lot of pms for sets and I want to make sure everyone's request are clear.

Please take the time to write down each individual size.

Ie. 1mm, 2mm, 3mm or .5mm, 1mm, 1.5, 2mm etc.

I don't want to send someone a set in 1mm increments when they actually wanted .5mm increments.

When you pm your request, please include your name and address.

Thanks for ordering. I'll be in the shop all weekend.

My email is [email protected]

[jmcdermott]

To everyone that ordered a punch set this week:

My drill bit order arrived Friday (Oct 3) minus all 2.5 and 4mm bits. They gladly drop shipped the missing items the same day but that doesn't help me much this weekend. I am going to Home Depot this afternoon to see if I can find some but I don't recall ever seeing metric there.

I should have the bits Monday since the vendor is just one state away. I will fill the orders Monday-Tueusday and ship mid week.

Sorry for the delay.

Jason