PaperModelers.com

Go Back   PaperModelers.com > Designers Corner > Designers helping designers

Reply
 
Thread Tools Display Modes
  #1  
Old 02-12-2023, 04:11 AM
paperPino's Avatar
paperPino paperPino is offline
Member
 
Join Date: Feb 2010
Location: Visintini, Italy
Posts: 136
Total Downloaded: 32.15 MB
Best high quality paper-varnish combination...

Hello everyone!
Years ago I started a project to build a digitally recolored Coronelli celestial globe. Later, I almost abandoned the project because I considered it too long, almost endless...
Now, I decided to reset everything and proceed to the end.
The globe will be 45-50 cm in diameter.
Unlike other previous projects, I would like to avoid using photo paper because of gluing problems. In fact, only using cyanoacrylate glue will result in fast gluing. But the use of cyanoacrylate glue is, as you well know, quite problematic.
There has recently been a discussion on this topic in this forum, but I would like to have some suggestions from you on which high quality paper (about 300g/m2)-varnish (protective and glossy or semi-glossy) combination to adopt for a high quality final result.
Thank you very much for your help.

Ciao!
__________________
http://www.paperpino.net
Reply With Quote
Google Adsense
  #2  
Old 02-12-2023, 08:51 AM
mbauer's Avatar
mbauer mbauer is offline
Member
 
Join Date: Apr 2009
Location: Nikiski, Alaska -9UTC/-8UTC DSTime
Posts: 4,065
Total Downloaded: 27.71 MB
Quote:
Originally Posted by paperPino View Post
Hello everyone!

There has recently been a discussion on this topic in this forum, but I would like to have some suggestions from you on which high quality paper (about 300g/m2)-varnish (protective and glossy or semi-glossy) combination to adopt for a high quality final result.
Thank you very much for your help.

Ciao!
Have tested many different cardstocks and photo paper. The really expensive photo papers can give ink a whole new look.

Coated glossy cardstock has a clay mixture that makes it really heavy for flying, but ink looks good on it.

When comparing INDEX, TAG and COVER cardstock one things becomes apparent right away:
TAG is more yellow-Brightness level is lower than either INDEX or COVER
INDEX is brighter than TAG but rougher than Cover.
COVER is the best all around choice for card stock projects. Smoother than Index and brighter, ink looks better.

Cover is designed for use as menus and such, in other words designed to be handled. Must look good, be eye appealing to the user.

My overall choice is to use Cover for most of my projects now. Best part is COVER comes in many different sheet sizes and weights.

Hope this helps a little.

Mostly opinion, but, beginning to understand why the paper manufacturers have these different set of numbers to compare quality and papers.

On one of the threads here, someone mentions not to use TAG for projects due to the Sulphur content. Well found out INDEX has just as much, not sure about COVER, but Sulphur is part of the process in making paper from what I've learned. Not sure, maybe the Sulphur amount used is shown by the brightness standard.

Mike

Last edited by mbauer; 02-12-2023 at 09:03 AM. Reason: Sulphur
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 10:32 AM.


Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.

Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
Copyright © 2007-2023, PaperModelers.com