small ship

[Tapcho]

Clever idea to use plastic models instruction sheet profile drawings as a starting point to a paper model. It works well.

Tappi

[BATMAN0080]

Originally Posted by Tapcho

Clever idea to use plastic models instruction sheet profile drawings as a starting point to a paper model. It works well.

Tappi

That's My made a first try.

[Kevin WS]

Very clever! Came out really well!

[BATMAN0080]

Originally Posted by Kevin WS

Very clever! Came out really well!

That's a lazy ider

[Atyagatya]

Hello! I would like to present my little model. I made it based on designs by Lou Coatney. JN Hiei 1:1250 scale. After completion, I felt that a few more things were needed. Tower expansion, boat, anti-aircraft gun emplacements, aircraft, antenna cabling at least simulated. Please welcome!

[BATMAN0080]

Originally Posted by Atyagatya

Hello! I would like to present my little model. I made it based on designs by Lou Coatney. JN Hiei 1:1250 scale. After completion, I felt that a few more things were needed. Tower expansion, boat, anti-aircraft gun emplacements, aircraft, antenna cabling at least simulated. Please welcome!

I about know this model.
That's one of my goals.good craft。

[Atyagatya]

Go ahead! I am waiting for the result! My next work will also be Master Coatney's other work, IJN Kirishima. Until then, I'll show you another model, the Czech President Masaryk river guard boat. It's not ready yet. Railings, armament, antenna cabling, boats, rescue belts, etc. are still in vain.

[BATMAN0080]

Originally Posted by Atyagatya

Go ahead! I am waiting for the result! My next work will also be Master Coatney's other work, IJN Kirishima. Until then, I'll show you another model, the Czech President Masaryk river guard boat. It's not ready yet. Railings, armament, antenna cabling, boats, rescue belts, etc. are still in vain.

Look s good! I like easy shipmodel.Easy to produce.

[Atyagatya]

Unless one is not satisfied with the possibilities offered by the designer :-) I gave the deck hatches a 3D option (reprinted and glued to the original) I made steps and railings (not everything is ready yet) I replaced the tubes of the guns with a hypodermic needle (much cheaper than buying the factory kits), stiffening, dirt, bending ventilation pipes from plastic pipe, etc :-)

[BATMAN0080]

Originally Posted by Atyagatya

Unless one is not satisfied with the possibilities offered by the designer :-) I gave the deck hatches a 3D option (reprinted and glued to the original) I made steps and railings (not everything is ready yet) I replaced the tubes of the guns with a hypodermic needle (much cheaper than buying the factory kits), stiffening, dirt, bending ventilation pipes from plastic pipe, etc :-)

It's a big project.