PaperModelers.com

Go Back   PaperModelers.com > Papermodelers' Help Desk > Hardware

Closed Thread
 
Thread Tools Display Modes
  #21  
Old 07-28-2011, 06:06 PM
cgutzmer's Avatar
cgutzmer cgutzmer is offline
Design Admin
 
Join Date: Jun 2007
Location: Sun Prairie WI
Posts: 7,362
Total Downloaded: 11.54 MB
Gotta agree with Dave. For MOST people their home vac will have too much suction and canned air is a better low cost alternative. Canned air will not suck parts out of their sockets. The small electronic vacs are nice and ones designed for the purpose could be good but I would stick with the canned air. Just a personal preference.

Chris
__________________
Want to buy some models from independent designers? http://www.ecardmodels.com and visit the shop!
  #22  
Old 07-28-2011, 06:16 PM
Mr. Hawley Mr. Hawley is offline
Member
 
Join Date: Dec 2010
Location: Shenandoah Valley
Posts: 103
Total Downloaded: 0
I am a big BIG fan of creating "positive pressure" in my computers. I'll put a nice larger fan or two on the side of the case with filters over the outside. The only "suction" is the fans drawing from outside and blowing into the case. The rest of the nooks and crannies of the case only have pressurized air blowing out so no dust gets in (just like a clean room).

One of the best filter materials I've found so far... Used dryer sheets. I might vac them once or twice but the supply is plentiful so I usually just loosen the frames I made and replace them.



This, of course, does not help laptops at all <grin>.
  #23  
Old 07-28-2011, 06:27 PM
cgutzmer's Avatar
cgutzmer cgutzmer is offline
Design Admin
 
Join Date: Jun 2007
Location: Sun Prairie WI
Posts: 7,362
Total Downloaded: 11.54 MB
Great! I bet it sounds like our storage array room at work
__________________
Want to buy some models from independent designers? http://www.ecardmodels.com and visit the shop!
  #24  
Old 07-28-2011, 07:07 PM
B-Manic's Avatar
B-Manic B-Manic is offline
Member
 
Join Date: Jul 2007
Location: Shangri La
Posts: 4,321
Total Downloaded: 19.54 MB
If discrete electronic components are made out of plastic; how did Silicon Valley get its name?
  #25  
Old 07-28-2011, 07:31 PM
airdave's Avatar
airdave airdave is offline
Member
 
Join Date: Apr 2009
Location: Ontario Canada
Posts: 14,254
Total Downloaded: 257.44 MB
Quote:
Originally Posted by B-Manic View Post
If discrete electronic components are made out of plastic; how did Silicon Valley get its name?
nix nix nix...



......


I love that dryer sheet idea!!!
I have a terrible problem with fans pulling in crap, but never thought to filter the openings!
What a simple idea...see, I don't know everything.
__________________
SUPPORT ME PLEASE: PaperModelShop
Or, my models at ecardmodels: Dave'sCardCreations
Google Adsense
  #26  
Old 07-28-2011, 09:28 PM
Zathros Zathros is offline
Banned
 
Join Date: Jul 2007
Location: Earth
Posts: 5,159
Total Downloaded: 0
Quote:
Originally Posted by B-Manic View Post
If discrete electronic components are made out of plastic; how did Silicon Valley get its name?
You're kidding right, I mean, you know the word "plastics" covers quite a large field, right, I mean, you do know this. Also, the first "Plastic" processor has just been invented. This is just semantics, right. And, you said discrete electronic components, which covers far more than I.C.'s, so, just what are you saying?

What does nix, nix, nix mean? Is a Moderator being acrimonious? No, seriously, you really must be joking, right, "discrete electronic components" in a world without plastic, how would capacitors, cell phones, and, well, almost everything electronic be made?
  #27  
Old 07-28-2011, 09:40 PM
airdave's Avatar
airdave airdave is offline
Member
 
Join Date: Apr 2009
Location: Ontario Canada
Posts: 14,254
Total Downloaded: 257.44 MB
Quote:
Originally Posted by B-Manic View Post
...how did Silicon Valley get its name?
I assume, gets its name from the uses of "silicon" which is:
a metalloid.
It is a chemical element, which has the symbol Si and atomic number 14.
A tetravalent metalloid, it is less reactive than its chemical analog carbon.
Silicon is the eighth most common element in the universe by mass,

but very rarely occurs as the pure free element in nature.

It is more widely distributed in dusts, sands, planetoids and planets as various forms of silicon dioxide (silica) or silicates.

In Earth's crust, silicon is the second most abundant element after

oxygen, making up 27.7% of the crust by mass.

Silicon has many industrial uses.

It is the principal component of most semiconductor devices, most importantly integrated circuits or microchips.

Silicon is widely used in semiconductors because it remains a semiconductor

at higher temperatures than the semiconductor germanium

and because its native oxide is easily grown in a furnace

and forms a good semiconductor/dielectric interface.



I'm just sayin... B-Manic
Sometimes confused with silicone...which is the plastic component used to make Pamela Anderson.




and "nix nix nix" was my funny way of hinting to B-manic not to step in the mud puddle.
I'm sorry if it was misunderstood.
There was no underlying message.
__________________
SUPPORT ME PLEASE: PaperModelShop
Or, my models at ecardmodels: Dave'sCardCreations
  #28  
Old 07-28-2011, 09:55 PM
mchale's Avatar
mchale mchale is offline
Member
 
Join Date: Jul 2009
Location: i live in greenville pa usa
Posts: 3,518
Total Downloaded: 71.56 MB
silicone...which is the plastic component used to make Pamela Anderson. funny dave lol rofl
__________________
mcgarrett:book'em danno
danny:really? is this gonna be your thing
  #29  
Old 07-28-2011, 10:06 PM
Zathros Zathros is offline
Banned
 
Join Date: Jul 2007
Location: Earth
Posts: 5,159
Total Downloaded: 0
Quote:
Originally Posted by airdave View Post
I assume, gets its name from the uses of "silicon" which is:
a metalloid.
It is a chemical element, which has the symbol Si and atomic number 14.
A tetravalent metalloid, it is less reactive than its chemical analog carbon.
Silicon is the eighth most common element in the universe by mass,

but very rarely occurs as the pure free element in nature.

It is more widely distributed in dusts, sands, planetoids and planets as various forms of silicon dioxide (silica) or silicates.

In Earth's crust, silicon is the second most abundant element after

oxygen, making up 27.7% of the crust by mass.

Silicon has many industrial uses.

It is the principal component of most semiconductor devices, most importantly integrated circuits or microchips.

Silicon is widely used in semiconductors because it remains a semiconductor

at higher temperatures than the semiconductor germanium

and because its native oxide is easily grown in a furnace

and forms a good semiconductor/dielectric interface.



I'm just sayin... B-Manic
Sometimes confused with silicone...which is the plastic component used to make Pamela Anderson.




and "nix nix nix" was my funny way of hinting to B-manic not to step in the mud puddle.
I'm sorry if it was misunderstood.
There was no underlying message.
Is that what you think you are looking at when you look at an I.C.?

Here, find out for yourself. Unbelievable, and so very sad.

Semiconductor OneSource: Semiconductor Glossary -- Search For : plastic ics
  #30  
Old 07-28-2011, 10:07 PM
B-Manic's Avatar
B-Manic B-Manic is offline
Member
 
Join Date: Jul 2007
Location: Shangri La
Posts: 4,321
Total Downloaded: 19.54 MB
Talking xin xin xin

So if you doped silicon with a semi conductor like gallium arsenide you would have integrated circuits or microchips. Where as if you inserted silicone in a dope you would have a exhibitionist spokes-chick.

Google Adsense
Closed Thread


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:23 PM.


Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.

Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
Copyright © 2007-2023, PaperModelers.com