|
#1
|
||||
|
||||
1/72 scale polish tug 'taurus'
after the 1950's 'klimek', started another more modern tug. based on the pro-model 1/100 scale taurus. since the approach on this one is to use the kit as template, i enlarged and printed out a b&w copy on 140lb/.42mm cardstock. scoured the internet and luckily found many photos including two really useful panoramic ones, as well as a general plan of the boat. intention is to add as much detail as possible. the goal for this project is a clean crisp build (learned a lot on the 'klimek'). hope to keep this thread going. all comments welcome. anyway this is what i have so far...
all set to go P1010448.jpg the spine is 3 layers of .42mm card, the ribs 2 layers, all hardened and glued with thin ca P1010449.jpg the fit is nice and tight after sanding and filing the slots P1010451.jpg the hull sides. i find the flex ruler useful for cutting gentle curves. won't work on sharp curves and the knife tends to dig into the soft plastic if not careful. anyone have a better ides? P1010454.jpg chopped off the bottom of the hull since i like waterline models P1010458.jpg cut out the deck. on this part decided to try minwax wood hardner to harden the card. 2 layers of .42 mm card glued together. minwax is wattery so soaks into the card very well but requires multiple coats. has toluene so i use a respirator to be safe. didn't turn out as stiff as ca but works. much cheaper than thin ca. 1 pint about $10.00 P1010461.jpg assembling the anchor housing. wanted to try lego bricks to build a jig. first attempt worked well. the parts fit nice and square. don't know if this method will work with all parts but was fun playing with the bricks, i must admit. by the way my home-made glue applicator in the background. P1010465.jpg P1010470.jpg the glu applicator is an ordinary sewing needle with the eye ground off P1010467.jpg sides attached to the hull. using squadron green putty to fill in some gaps. anyone know the difference between the green and the white? next episode to follow... |
Google Adsense |
#2
|
||||
|
||||
Always glad to watch a tug being built.
Your workspace is excellent and your work so far is certainly crisp and clean. You have provided some useful info on technique and have asked some questions that I can't answer, but the answers to which I await with interest. Don |
#3
|
||||
|
||||
thanks don. i am fairly proud of the workbench, especially in being able to recycle some corrugated cardboard packing material from work for the shelving. the bench is also an old desktop with ikea legs and and drawers from goodwill! i raised the bench to about 31" to make it easier on my back (suggestion from old wood modelmaking book)
|
#4
|
||||
|
||||
1/72 scale polish tug 'taurus'
hello all,
been a few months since the last update. making slow but steady progress: started on the superstructure P1010476.jpg P1010477.jpg painted the inside black, as background to the windows P1010479.jpg will get back to the hull/superstructure later P1010484.jpg i like to build inside out, so starting on the wheelhouse interior. planning on adding as much detail as possible, so several months of work ahead P1010485.jpg cutting out and gluing the all the individual pieces (i don't like folding). since i am hardening everything with ca it's easy enough to fill gaps and sand P1010494.jpg three of the 5 consoles P1010492.jpg adding details to the winch and/or crane control. P1010513.jpg P1010663.jpg 'rubber' boot for the joystick, made from milliput. styrene tube for the stick itself P1010664.jpg P1010665.jpg P1010668.jpg P1010671.jpg P1010673.jpg moving on to the captains chair. miliput to the rescue again. love this stuff. so easy to sand, shape and polish P1010507.jpg P1010508.jpg P1010510.jpg i have a question at this point. how do you guys deal with holding and cutting micro sized parts? i use a magnifying visor, surgical quality tweezers but still not happy with the quality of the finished pieces. trying build a micro sized disc sander with my dremel and researching how to do photoetching at home. would love hear your thoughts. anyway episode 3 coming soon... amit |
#5
|
||||
|
||||
As a practical matter, it seems the white tends to shrink less when used on plastic models. Beyond that, it may simply be that one or the other color offers better contrast to what color plastic you are applying it to.
__________________
Screw the rivets, I'm building for atmosphere, not detail. later, F Scott W |
Google Adsense |
#6
|
||||
|
||||
seven years since i last posted on this thread! in between a lot of life events, detours into other models, and uneven progress on the 'taurus', updates fell on the wayside. well, schools out and winter hibernation has begun, so what better time than now to catch up. without further ado here's what i have managed to complete:
one of two main consols. drew the layout in illustrator based on photographs and a bit of imagination. P1010696.JPG P1010699.JPG experimented with diy photoetch. not great but ok from a distance. P1010712.JPG P1010714.JPG P1010721.JPG lots of little bits and pieces followed! P1010748.JPG P1010749.JPG one consol finished. i think! P1010778.JPG parts box P1010819.JPG some of the various electronics on board. again based on photographs and guesswork. P1010825.JPG P1010843.JPG some other interior fittings. fire extinguisher and ac vent. P1010881.JPG P1010883.JPG took over two years to finally finish the interior. doors and windows not included. P1020128.JPG P1020130.JPG don't want to run into photo limit so tbf... Last edited by a380; 12-13-2020 at 08:31 PM. |
#7
|
|||
|
|||
Just found your thread today. Wonder build and details. Also appreciate the tips and techniques you describe. Your photos are top quality as well. Hope to see more of your work soon.
John |
#8
|
||||
|
||||
to continue: i had bought the emblaser 1 by now and what a lifesaver it has been! this is when i took a detour to build a model of the 'bristol 188' and parts for a diorama inspired by the movie 'porco rosso'. anyway back to the 'taurus'.
i neither have the skill nor the patience to hand-cut parts like this! emblaser to the rescue. P1020133.JPG soaking in thin ca P1020134.JPG thin sheet of clear polycarbonate between frames for each wheelhouse window. P1020140.JPG windows mounted and masked for painting the outside of the wheelhouse. the green and orange part is the roof. P1020149.JPG decided to tackle the mast next. basically, a styrene or wire core (can't remember which now) with laser cut card disc stacked up. thin ca and putty to smoothen things out. the support legs are styrene. P1020142.JPG the anemometer. again, wire core, paper discs and bits of styrene and brass. P1020147.JPG tried my hand at building a bending jig and soldering for this mast part. P1020148.JPG Making the ladder and cage were easy with the cutter. P1020153.JPG but most difficult parts so far to assemble! P1020156.JPG the running lights. P1020157.JPG P1020158.JPG the mast ready for painting. P1020232.JPG and finally finished! P1020238.JPG P1020239.JPG P1020240.JPG to be continued... |
#9
|
||||
|
||||
flash forward to 2020. over the summer break, i worked on the railing for the wheelhouse roof.
laser cut stanchions, wire handrails and assembly jigs. P1020610.jpg P1020612.jpg P1020611.jpg P1020645.JPG and a ladder P1020626.JPG finally, this week's output. Exterior platforms and stairs. P1020664.JPG P1020666.JPG P1020665.JPG P1020667.JPG all caught up! what's next...? |
#10
|
||||
|
||||
Superb work.
What scaled is it? Still 1/00 or have you enlarged it a bit more - it looks big!
__________________
The SD40 is 55 now! |
Google Adsense |
|
|