Need built models of any ecardmodels models :) compensation and postage paid.... - Page 7

**cgutzmer** · #61 09-01-2010, 01:41 PM

you mis read - 50 cents per sheet is what I suggested. I think I will drop that to a quarter per sheet printed. My goal here is to advertise the hobby but I cant afford to take a loss either....
Chris

**billy.leliveld** · #62 09-01-2010, 01:57 PM

How about sending you back the X15?
(I think it's tough enough to survive the trip back)

**cgutzmer** · #63 09-01-2010, 02:02 PM

WOW! Really?? That would be awesome

**billy.leliveld** · #64 09-01-2010, 02:09 PM

Well, you need a show stopper,and you can see how it turned out for real.. Just PM me your real adress, I think I didn't save the envelope it came in..:D

**cMags** · #65 09-01-2010, 03:00 PM

That will certainly be impressive to folks. I doubt, Chris, that you'll need 5 copies of that one however. Too intimidating, but a good show of what's possible with practice.

**cgutzmer** · #66 09-01-2010, 03:05 PM

prolly one or two will suffice

this is more aimed at beginners but this is the kind of centerpiece I was hoping for!

**cgutzmer** · #67 09-02-2010, 07:41 AM

ARGH! I was printing off the p40 warhawk last night - following my usual method, I print one copy to make sure nothing gets cut off - looked good! Printed off the other four then found one stinking part that got cut off.... not need to reprint the whole set! I gotta stop looking at these when I am tired

Chris

**cMags** · #68 09-02-2010, 07:57 AM

Is that the paper AircraftWerks P-40? If so, the pages are set at 8.5x11 but the margins are tight. Double check again - looks like the wingspar and the starboard window frame (part 106) may be the tightest parts.

**cgutzmer** · #69 09-02-2010, 08:40 AM

window frame is what got chopped :(

Thats the variant I built a couple years ago and has been hanging in my kids room

Chris

**cMags** · #70 09-02-2010, 11:01 AM

Well then at least it's only one page you have to re-print. But double-check that wingspar - it looks like it's tight towards the top of the page.

Might also want to talk to the designer about modifying the parts placement. There is plenty of room to move the window frames inboard a bit.