#1
|
||||
|
||||
Steam Locomotive T-3 (1882) - MODELIK - 1:45
Hello friends of steam locomotives
With my next project I'm going on the rails again. The Modelik T3 in 1:45 scale has been chosen. This sheet is a digital print. Since I've already built two such models, I'm positive about the future. On four pages there are about 1000 parts in clean print, I should be able to get by with 1.5 pages of picture instructions. Sincerely Kurt |
Google Adsense |
#2
|
||||
|
||||
Hy Kurt. Good choice. It's a nice locomotive. I have the same model at 1:25 scale ready to built.
If you can compare is there a great diference between digital with standard print? I'll follow your building. Thanks Ramon |
#3
|
||||
|
||||
Hello Ramon,
there is a difference. With digital printing, the color partially jumps off at the edges, but since I have the locomotive wants to show in used condition, this does not matter Kind regards to barcelona from Styria welcome ! And here we go... Frame construction: one frame part is reinforced with 0.5 mm cardboard ... glue the back part without reinforcement ... ... only then cut out Sincerely Kurt |
#4
|
||||
|
||||
Good luck. Look forward to the build.
__________________
The SD40 is 55 now! |
#5
|
||||
|
||||
Great project!
Your usual clean and precise work so far. Don |
Google Adsense |
#6
|
|||
|
|||
Hi Kurt
1st - look great and great choose.
2nd - I like that you do all time somthing new, build aircraft after tank train and other, I think it is allways fun , I like to do new things as well all the time but also to do them smallmostly print 4 pages on one. good luck and waiting to see the results |
#7
|
||||
|
||||
Your models are always good, this will be a great loco when finished.
|
#8
|
||||
|
||||
Another interesting new project! Good luck Kurt, I'll be watching.
I'm somehow amazed that you can work on so many models simultaneously. Are the days in your universe 48 hours long instead of 24 ? Cheers, Erik |
#9
|
||||
|
||||
Hello Guys
my days also have 24 hours , but I like to be in action Glue parts 1b and 1c on... Glue part 1d to the bottom of the frame Install two parts 1e on each side of the third axle ... continue with parts 2 + 2a ... ... which are glued inside the frame Sincerely Kurt |
#10
|
|||
|
|||
Are you intentionally wearing down the print colors?
|
Google Adsense |
|
|