#21
|
||||
|
||||
Quote:
Mike |
#22
|
||||
|
||||
Quote:
Mike |
#23
|
||||
|
||||
Quote:
Well, I am certainly looking forward to seeing your project get a new start. Glad I could provide some motivation. Mike |
#24
|
||||
|
||||
As some progress has been made, I am able to provide some images of the current state of this build. I went below the waterline and installed the propellers I have remade. I decided to gamble and try something different. Instead of using the glossy brass (Testors 1182) I had used on my first two builds, I mixed some yellow and brown to attempt to approximate the tone of brass. The idea is to get a “flat” finish more in line with the color format of the whole model. I like the result. However, your comments pro and con are welcome. Other progress includes the fixture of the quarterdeck to the hull frame along with installation of the aft main barbette. Also, as you can see, I am test fitting the primary section of the aft mast along with the forward section of the main deck over the bow.
The decks were made by printing them onto 22lb paper, then laminating that to 65lb cardstock. I find the laminating process lends itself to nice cutting, and proves to be excellent material for punching round (or square) holes. So she goes, slow and steady. Mike |
#25
|
||||
|
||||
Hey Michael... I think you made a wise choice going that route on the prop color. It's much more fitting for this era model as well.
I'm guilty as anyone of whipping out the gold-flake acrylic and having the infamous gold props... I think this looks much more realistic. You might even consider using dry-brushed acrylic (darker browns and earth colors) to weather your props?
__________________
Recently Completed: 1/700 USS Nevada (resin) In the Shipyard: 1/350 USS Washington (resin) On the Horizon: Dom Bumagi USS Helena 1/200 (60% complete) |
Google Adsense |
#26
|
||||
|
||||
I for one think props for your props. I hate to take another guys idea, but I will if it suits my need for detail, and your props are just such, worth copying. Again another tip for a more realistic finish. You get the BIG OLE GRIN for that one.:D:D:D Oh yea, that ship ain't too shabby either, I know, my Ma said don't say ain't. You can take the boy out of the South, but you can't take the South out of the boy!
Last edited by Papercut; 01-08-2009 at 07:32 PM. |
#27
|
||||
|
||||
Thanks for the good words gentlemen.
Mike |
#28
|
||||
|
||||
Your paint blends much better with the other textures then the glossy brass would. I like the suggestion of just a touch of weathering on them, because I think they could be toned down just a bit more.
|
#29
|
||||
|
||||
It's certainly a nice clean build and a pleasure to behold.
Don |
#30
|
||||
|
||||
Oslabya Build - Update
Some of you would know better than I, but my guess is, by weight, the hull is approx 90% of the ship. Now in the middle of my third full-hull build, this student is beginning to realize the importance of getting it straight. The hull has to look right, so I am taking my time on that score. These images show progress to date. The main decks have been attached to the upper hull frame. The forward barbette and anchor bays have been installed. Also, I have included a close-up of the first work with portholes. They are located on a walled section that will be covered by the aft part of the main deck. I decided to put a little extra work into them, since they are the forerunners of many more to come. I count at least 50 on each side going from just below the main deck all the way down to the waterline. I plan to give them all similar treatment. The lower mast sections you see are being test-fit, and are removable.
Its terrific watching the great boats you guys are putting together. Thanks for the motivation. Mike |
Google Adsense |
|
|