#21
|
||||
|
||||
Hi Don , thank you
The aft deck also consists of two parts ... so it rests very well on the frames Continue with the superstructure wall aft and the wheelhouse, whereby the portholes can be shown closed or open ... which I punch out in the middle using a template Place the whole thing on the quarterdeck Sincerely Kurt |
#22
|
||||
|
||||
Wow thats looking great. Like the pics showing how you put the hull together.
__________________
Greg |
#23
|
||||
|
||||
Hi Greg ,
thank you , I am so happy that you like my showing now letīs go on ... The mine rails follow ... where the first laser parts are installed ... ... which are already very filigree Sincerely Kurt |
#24
|
||||
|
||||
Continuing with the main deck and the underside support beams ... the four-part deck ... ... glue ... the support beams ... ... glue on the underside Sincerely Kurt |
#25
|
||||
|
||||
And again the tension rises ... main deck glued without problems
This is followed by the bridge house substructure, the front wall ... paying close attention to the building sketch here ... ... how the flaps should be bent Sincerely Kurt |
Google Adsense |
#26
|
||||
|
||||
Continue with the back wall of the deckhouse ... where there are the first window panels ... ... which can optionally be glued on Sincerely Kurt |
#27
|
||||
|
||||
Its always a pleasure to watch your work Kurt.
Mike |
#28
|
||||
|
||||
Hello Mike ,
itīs also a pleasure for me to do this work The bridge deck follows ... which is again in two parts ... ... and fits exactly ... Part 38, the transom ... ... is glued to the now freed hull Sincerely Kurt |
#29
|
||||
|
||||
The knife scraps are used as ballast ... first fitting on the underwater hull Sincerely Kurt |
#30
|
||||
|
||||
now the pictures ... |
Google Adsense |
|
|