#11
|
||||
|
||||
Thanks Gary
A bit different type of building for me. But as usual, I like helping designers and repainters like yourself. I think boats are as far as I would venture into other arenas of building. Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
#12
|
||||
|
||||
Hull joined
At this point, I joined the forward and aft halves of the hull. Easy assembly. I used the integral glue tabs, however, for a final build, I would recommend to separate all the tabs where the surfaces mate and glue them conventionally. This way, the seams would be smooth and there will be no bump there.
Also, since there are no internal structures or framing, I cut and placed my own. I d strongly recommend them. Primary reason is to keep the shape of the boats from warping, and secondly, provide support for the floors above. Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
#13
|
||||
|
||||
Upper forward floor
The next phase is to attach the forward floor on top.
and a rear view of the inner framing before the floor above it goes on. Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
#14
|
||||
|
||||
Forward upper deck and bride.
Added gussets to the two frames to make sure they do not topple over during assembly.
] bridge and sides are added top is added Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
#15
|
||||
|
||||
Rear upper deck
Attach the floor and the sub assembly to the rear upper hull.
Notice I added card stock inside where vertical walls are to be attached. This way, you can squeeze the sides together against the card to keep them from warping. Nothing complicated here Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
Google Adsense |
#16
|
||||
|
||||
Isaac, what weight of card stock are you using? I was wondering how structurally sound the sides of the hull were.
Gary
__________________
"Fast is fine, but accuracy is everything" - Wyatt Earp Design Group Alpha https://ecardmodels.com/vendors/design-group-alpha |
#17
|
||||
|
||||
Quote:
180 gsm is still OK, but as I stated, internal framing is required. Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
#18
|
||||
|
||||
Thank you Isaac.
__________________
"Fast is fine, but accuracy is everything" - Wyatt Earp Design Group Alpha https://ecardmodels.com/vendors/design-group-alpha |
#19
|
||||
|
||||
Rear decks
There are three decks in the rear. The two lower decks are shown
For me it was a puzzle, but additional views solved that. Assembled. The rear attached Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
#20
|
||||
|
||||
Forward optional parts
There are two small rectangular shapes marked optional.
They are to be installed under the upper sides with the name Holiday. I added a piece of wood inside to keep them straight. Parts they will go here: Assembled. Isaac
__________________
My gallery [http://www.papermodelers.com/gallery...v-r-6&cat=500] Recent buildsMeteor F1, Meteor F8, Mig-Ye8, NA Sabre, A-4E Skyhawk,Mig-15 red, Mig-17 repaint |
Google Adsense |
|
|