PaperModelers.com

Go Back   PaperModelers.com > Card Models > Model Builds > Ships and watercraft

Reply
 
Thread Tools Display Modes
  #1  
Old 11-12-2007, 02:50 PM
Vicar Vicar is offline
Member
 
Join Date: Jul 2007
Posts: 19
Total Downloaded: 39.59 MB
Suspending ships boats

How do you experts fix ships lifeboats to the supporting davits?
At 1/250 scale I find trying to rig the pulleys pushes my skill levels to the extreme, and if there are a lot the frustration threshold takes a bashing too.

I've tried card cutouts of the pulleys and ropes, and painted carefully they don't look to bad, but I'd like to do better. Any suggestions, or do we just accept it's difficult?
Reply With Quote
Google Adsense
  #2  
Old 11-12-2007, 03:38 PM
pitlord's Avatar
pitlord pitlord is offline
Member
 
Join Date: Oct 2007
Location: Czech Republic
Posts: 29
Total Downloaded: 0
Yes it is difficult. With pic we can help you better....
Reply With Quote
  #3  
Old 11-13-2007, 10:35 AM
Oliver Weiss's Avatar
Oliver Weiss Oliver Weiss is offline
Member
 
Join Date: Jul 2007
Posts: 237
Total Downloaded: 0
I do it like this:

1. I color three lengths of the thinnest invisible sewing thread with permanent marker.

2. I knot one set of ends together and attach a weight to the knot.

3. Place the threads on a long board, with the weight hanging off one end. Tape the other ends of the threads to the board, making sure all the threads are snug. The weight ensures that all three threads have exactly the same tension. Tape the loose ends to the board.

4. Now I fiddle with the threads to space them evenly. Again, this depends on the number of tackles I make.

5. I punch twice as many paper disks as I need to represent the blocks. I slike one disk under the threads. I apply a drop of crazy glue and put another disk on top. Press carefully, let set and proceed a little distance down the thread (as long as the tackle needs to be) and repeat.

6. I leave about an inch or so and start the next tackle down the line.

7. When the glue has cured thoroughly, I paint the disks.

8. I separate the tackles and remove the two outer threads from each end. Like that I get a tackle that has one thread, a block, three threads, another block and another single thread.

Hint: If you put too much tension on the thread, the tackle will curl when you cut it out. If you put uneven tension on the threads, they will curl unevenly. Most of that will go away when you attach the tackles to your model. Either way, the method is quick and easy enough to make a few more tackles than what you need and just pick the best ones.


Cheers,


Oliver
Reply With Quote
  #4  
Old 11-13-2007, 11:28 AM
Darwin's Avatar
Darwin Darwin is offline
Member
 
Join Date: Jun 2007
Location: Eastern Idaho
Posts: 2,158
Total Downloaded: 314.05 MB
Oliver pretty well stated it. The only differences with my method is I use black silk thread (which I get from the local fly fishing supply shop) and "paint" the assembly with thin CA glue to stiffen it up prior to taking it from the jig.
__________________
It's not good to have too much order. Without some chaos, there is no room for new things to grow.
Reply With Quote
  #5  
Old 11-13-2007, 01:47 PM
Vicar Vicar is offline
Member
 
Join Date: Jul 2007
Posts: 19
Total Downloaded: 39.59 MB
Thanks for that. I'll go away and let you know how I get on, but it'll be a couple of days. works interferes!
Reply With Quote
Google Adsense
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 07:00 PM.


Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.

Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
Copyright © 2007-2023, PaperModelers.com