Updated version with improved fabric texturing. See this post in the Inka thread. Updated 6 August 2012. If you have downloaded the first version, please enjoy this improved version.

The model is textured & repainted from an original by Mitja Sersen Erman, available as a free download from his site ultralajt.webs.com (scroll down until you find the Inka model).

The original model was 1/25 scale. This 1/16 scale version is formatted for a paper size of 42 x 21,6 cm, which is A3 length cut down to the maximum width of an ordinary A4-Letter inkjet writer. If you have an A3 printer, no problems, you will just get a bit of surplus paper. If you have an ordinary inkjet printer, cut your own sheets from A3. Use a paper weight of ca 200g/sqm. That usually means a thickness of ca 0.25 mm.

To build in other scales:

1/24 scale: Print at 67%. This is a common scale for some commercial printed models which could be used as tug aircraft for a nice diorama.

1/25 scale: Print at 64%. This is the scale of Mitja Sersen Ermans original model.

For both of these scales you can use either US Letter or European A4 size paper sizes. There will be some extra white spaces, of course, on top & bottom.

1/33 scale: Print at 48%. You can use portrait orientation of your paper and print 2 pages per sheet.